Product SKUs |
|||
| SYS-6027R-72RFTP+ | SuperServer 6027R-72RFTP+ (Black) | ||
Chassis |
|||
| Form Factor | 2U Rackmount | ||
| Model | CSE-829BTQ-R920WB | ||
Integrated Board |
|||
| Super X9DRW-7TPF+ | |||
Processor/Cache |
|||
| CPU | Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *) |
||
| Cache | Up to 30MB | ||
| System Bus | QPI up to 8 GT/s | ||
| Note | † BIOS version 3.0 or above is required | ||
System Memory |
|||
| Memory Capacity | 24x 240-pin DDR3 DIMM slots
|
||
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | ||
| DIMM Sizes |
|
||
| Error Detection | Corrects single-bit errors | ||
On-Board Devices |
|||
| Chipset | Intel® C602J chipset | ||
| SATA |
|
||
| SAS |
|
||
| IPMI | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| Network Controllers |
|
||
| Graphics | Matrox G200eW | ||
Input / Output |
|||
| SAS | 8x SAS2 ports (6Gbps) | ||
| LAN |
|
||
| USB | 5x USB 2.0 ports total (2x rear + 2x via header + 1x Type A) |
||
| Video | 1x VGA Connector | ||
| Serial Port | 1x Fast UART 16550 serial port 1x internal header |
||
| Expansion Slots | |||
| PCI-Express |
|
||
| Drive Bays | |||
| Hot-swap | 10x 3.5″ Hot-swap SAS / SATA HDD trays (connected to onboard storage controller – 2x SATA3, 8x SAS) | ||
| Power Supply | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | ||
| Management | |||
| Software |
|
||
| Power Configurations |
|
||
Standard Parts List |
|||
| Part Number | Qty | Description | |
| Motherboard / Chassis | MBD-X9DRW-7TPF+ | 1 | Super X9DRW-7TPF+ Motherboard |
| CSE-829BTQ-R920WB | 1 | 2U Chassis | |
| Backplane | BPN-SAS-829BTQ | 1 | 10 HDD BPN, SGPIO only support; added precharged resistor for hot-swap |
| Power Supply | PWS-920P-SQ | 2 | 920W 1U Redundant PWS W/ Quiet Mode |
| Cable | CBL-0157L-01 | 1 | 8 pin to 8 pin ribbon SGPIO cable with tube, 61.5cm, PBF |
| CBL-CDAT-0527 | 1 | 4 pin to 4 pin 15cm LAN3/4 LED extension cable for 829B with X9DRW-7TPF+. 26AWG.,RoHS/REACH,PBF | |
| Cable 3 | CBL-0278L-01 | 1 | IPASS TO 4 SATA RA 64/54/44/34CM W/64CM SB, RA. 30AWG |
| Cable 4 | CBL-0287L-01 | 1 | IPASS TO 4 SATA 43/43/33/33CM, W/ 43cm SB, RA ,30AWG |
| Cable 5 | CBL-0230L | 2 | 65CM SATA ROUND S-RA PBF. 26AWG |
| Heatsink / Retention | SNK-P0048PSC | 2 | 2U Passive CPU Heat Sink for X9, X10 2U WIO/WIO+ Series Servers |
| Rail Set | MCP-290-00053-0N | 1 set | Rail set, quick/quick, default for 2,3U 17.2″W |
| Riser Card | RSC-R2UW-2E8E16-O-P | 1 | RSC-R2UW-2E8E16 |
| Riser Card | RSC-R2UW-2E8R-O-P | 1 | RSC-R2UW-2E8R-O-P |
SuperServer 6027R-72RFTP+
Key Features
1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Up to 1.5TB ECC DDR3, up to 1866MHz; 24x DIMM sockets
3. Riser card support:
Left side – 1 (x16) & 2 (x8) PCI-E 3.0
Right side – 2 (x8) PCI-E 3.0
4. Intel® 82599 Dual port 10G SFP+ & Intel® i350 Dual port GbE controllers
5. 10x 3.5″ Hot-swap SAS/SATA HDD Bays; 8x SAS2 ports support via LSI 2208; 2x ports SATA3 via Intel C602J
6. 920W Redundant Power Supplies Platinum Level (94%)
Hãy là người đầu tiên nhận xét “SuperServer 6027R-72RFTP+”
Bạn phải bđăng nhập để gửi đánh giá.
Đánh giá
Chưa có đánh giá nào.